Games in Progress: 3 | Players logged in: 3 | Players Registered: 37413 | Games Played Total: 68656
   Home   Help Search Login Register  
Pages: [1]
« previous next »
  Print  
Author Topic: Cannot open port 6260  (Read 1091 times)
cornelle
Mule Forum Newbie
*
Posts: 1


View Profile
« on: January 23, 2010, 01:36 »
I am running windows xp, firewall on with port 6260 open.  I have a dlink 604 router and I have opened up the 6260 port to both TCP and UDP.  Mule says the port is not open.  Any suggestions?  I'm at a loss.
Logged
Mega Byte
Prototype Tester
Mule Regular
***
Posts: 72



View Profile
« Reply #1 on: February 13, 2010, 06:15 »
You may need to set up both Port Forwarding and Port masking on some routers.  I don't know that one, but have a look at the settings, and see if there is a place to establish both.
-S
Logged
Intergalactic Mole
Prototype Tester
Mule Expert
*****
Posts: 331



View Profile
« Reply #2 on: February 14, 2010, 03:33 »
You probably forwarded the ports to the wrong IP.
Logged
Mega Byte
Prototype Tester
Mule Regular
***
Posts: 72



View Profile
« Reply #3 on: February 14, 2010, 17:02 »
Well, this can be a little tricky.  In likelihood its not forward to the wrong IP, but from the wrong IP.  Ensure you are translating from you private IP to a public one.  I recommend setting your personal PC to a static IP address instead of DHCP IP, so that it doesn't change every time you have a PC restart, and something else grabs your old IP.
-S
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to: