Print Page - A simple way to Port Forward on a Mac -- Port Map

Planet M.U.L.E.

Planet Mule 1 => Planet M.U.L.E. 1 Discussion => Topic started by: C64 nostalgia on February 07, 2010, 07:44

Title: A simple way to Port Forward on a Mac -- Port Map
Post by: C64 nostalgia on February 07, 2010, 07:44

Port Map is a simple port forwarding application for the Mac. With it, you have no need to setup your router. Just run the program, and it opens your port(s). When you are done, your port(s) close when you quit Port Map.

I use Port Map. It works well for me. Macworld gives it 5 out of 5 mice. You can find the review here: http://www.macworld.com/article/140439/2009/06/portmap.html (http://www.macworld.com/article/140439/2009/06/portmap.html)

You can download Port Map here: http://www.codingmonkeys.de/portmap/ (http://www.codingmonkeys.de/portmap/). Remember, set it up for port 6260 UDP and TCP. Good Luck.

Title: Re: A simple way to Port Forward on a Mac -- Port Map
Post by: angrytoothbrush8 on February 10, 2010, 22:09

I have the program im not seeing any results...

Title: Re: A simple way to Port Forward on a Mac -- Port Map
Post by: C64 nostalgia on February 11, 2010, 00:28

Sorry Port Map is not working for you... Here are some things that might help:

Does your router offer Universal Plug and Play (UPnP), and is UPnP enabled?
Did you make a mapping for mule in Port Map?
For the mapping, did you use port 6260 with the TCP and UDP boxes checked?

Hope this helps...